Project Description
CineEye 2S
Accsoon CineEye 2S is a portable wireless WiFi video transmitter. It is identical to the CineEye 2, except that it has both SDI and HDMI inputs, which is a great budget-friendly alternative to expensive wireless video transmitters. In addition to the same features as the CineEye 2, images captured by CineEye 2S can be streamed via RTMP to viewers or remote clients who use YouTube and other web platforms.
*CineEye 2S introduction.
*CineEye 2S features SDI and HDMI inputs.
SDI In & HDMI In
Suit for more cameras
The CineEye 2S has an HDMI input as well as an SDI input. No matter what kind of camera you have, you can use CineEye 2S wireless video transmitter to complete image and voice transmission.
Claimed <0.06 s
Ultra-low latency
CineEye 2S quotes a figure of 60ms for latency. While most camera devices add to the problem of latency in shooting, CineEye 2S has an almost imperceptible latency of fewer than 60ms, which guarantees the synchronization of shooting.
*CineEye 2S features very low latency.
*CineEye 2S features 500ft(150m) transmission range.
Transmission Range up to 500ft/150m
Real-time remote monitor
With CineEye 2S, you can easily get up to 500ft/150m far away and still have a stable signal, this is usually going to be achievable on flat, open terrain where there is little wireless interference. In most cases, CineEye 2S can exceed operating claimed distance by a wide margin.
High Resolution & Low Buzz
Fast video and audio transmission
CineEye 2S supports multiple video input of up to 1080p/60fps, also supports 44.1kHz/48kHz 16bit/24bit also input, and it streams the audio with low compression codec, giving you near lossless audio monitoring experience.
*CineEye 2S transmits both video and audio.
*CineEye 2S pairs with iPad.
Hook Up With 4 Screens
Multi-screen & co-monitoring
CineEye 2S allows you to monitor your camera feeds wirelessly on multiple iOS and Android devices. Rigging up a lightweight CineEye 2S to a camera so that directors, makeup artists, or even a production designer can see images, which is an affordable way to offer a wireless feed to clients or crewmembers you work with.
With Fanless Design
Quiet transmitter with low power consumption
CineEye 2S differs from other built-in fans wireless video transmitters in that it adopts a fanless setup to gain ultra-clear audio and ultra-low power consumption.
*CineEye 2S designed with low power consumption and no-fan.
*Professional monitoring App – Accsoon Go.
Assist Your Shooting Work
Professional monitoring App: Accsoon Go
Accsoon GO App is more than just a viewer. It gives you the ability to activate monitoring functions such as greyscale, RGB, histogram, waveforms, focus peaking, grids etc. You even get the ability to operate video and audio recordings with this APP.
Easy Firmware Updates
Rely on the official App: Accsoon Go
Only download Accsoon’s official App: Accsoon Go from the iOS or Android application store. Then use Accsoon Go to upgrade your CienEye 2S.
*CineEye 2S updates firmware easily.
*CineEye 2S features 1.3inch OLED screen.
1.3 inch Build-in OLED Screen
The whole information at a glance
On the front side of the CineEye 2S is a small-sized OLED display where you can see crucial information and make changes, such as input video and audio info, battery level, connection status and current 5G WiFi channel.
Easily Set up & Carry
Foldable Antenna and Compact Size
120 degree foldable antenna, portable but with powerful signal. Compact design makes it a real pocket wireless video transmitter.
*CineEye 2S features foldable antennas.
*CineEye 2S features hot swap.
DC Port Power or Optional Battery
Depending on your charge preference
CineEye 2S has in-built battery plates that can take Sony NP batteries. You also have the option to power it through a 7.4V-16.8V DC input. Charge the way you like.
CineEye 2S Details
| Projects | Transmitter |
|---|---|
| Video Input | SDI/HDMI |
| SDI (Level A) | 1080p 23.98/24/25/29.97/30/50/59.94/60fps 1080p 23.89/24/25/29.97/30PsF |
| HDMI | 1080p 23.98/24/25/29.97/30/50/59.94/60fps 720p 50/59.94/60fps 480p 59.94/60fps |
| Audio | 44.1KHz/48KHz 16bit/24bit PCM |
| Latency | <0.06 seconds ( Camera latency not included) |
| OLED | 1.3 inch OLED |
| Transmission Power | 17~20dBm |
| Transmission Range | 500 feet(no obstacles, no interference) |
| Power Consumption | 4 Watt (Typical） |
| Operating Temperature | -10~40℃ |
| Dimensions | 108mm×68.5mm×30mm(Antenna not included) |
| Weight | 213g |
Video Input SDI/HDMI |
SDI (Level A) 1080p 23.98/24/25/29.97/30/50/59.94/60fps |
HDMI 1080p 23.98/24/25/29.97/30/50/59.94/60fps 720p 50/59.94/60fps 480p 59.94/60fps 480p 59.94/60fps |
Audio 44.1KHz/48KHz 16bit/24bit PCM |
Latency <0.06 seconds (Camera latency not included) |
OLED 1.3 inch OLED |
Transmission Power 17~20dBm |
Transmission Range 500 ft (no obstacles, no interference) |
Camera Control Yes |
Power Consumption 4.0 Watt (Typical) |
Operating Temperature -10~40℃ |
Dimensions 108mmx68.5mmx30mm (Antenna not included) |
Weight 213g |
App Downloads
iOS version V 1.2.4/IOS 11.0 or higher.
Android version V 1.2.4/Android 6.0 or higher
FAQ of CineEye 2S
Q. Video is choppy
1.Please make sure the antennas have unfolded.
2.Please make sure there is no cable around the antenna.
3.Please switch to another channel manually.
